ND-PE102W

 Click on the picture to enter the Gallery
PE102W
PE102W1

Newbridge® ND-PE102W  is a standard waterproof outdoor POE repeater, consisting of 1 PD power receiving interface POE IN + 2 standard POE output interfaces POE OUT1 or POE OUT2, this is a high performance, low power consumption 10/100M trunk line extension transmission POE switch, which is the best choice for security monitoring, POE powered transmission networking and small intelligent construction. Provides 2*10/100Mbps ports and 1*10M/100Mbps POE PD power receiving interface, which can be used to connect higher bandwidth upstream devices. Supports standard POE input, port supports 52V output and 30W power. Uses store and forward technology to ensure bandwidth is allocated to each port efficiently. Full wire speed 100M rate connectivity to workgroups or servers, powerless design, plug and play, this flexible non-blocking architecture allows users to use networks that are not limited by bandwidth and media. The switch ports support half-duplex and full-duplex operating modes, each switch port supports adaptive features, and the ports use store-and-forward mode for network solutions.

FEATURES

  •  Support IEEE 802.3/802.3u

  •  3*10/100Mbps auto-adaptive RJ45, support automatic flip (Auto-MDI/MDIX)

  •  Support 1K MAC address

  •  Support EEPROM configuration

  •  Support IEEE802.3 af/at

  •  All ports support 2KV lightning protection

  •  Support maximum forwarding packet length 2048 bytes

  •  With overload protection, output short circuit protection and other functions

  •  It has the characteristics of small size, high efficiency, stable operation, long-distance transmission, etc.

Product Name 3-port standard POE cascade treasure (POE repeater, POE extender)
Product Model ND-FPS102
Interface 1* 10/100M RJ45 POE OUT1（Auto Negotiation/Auto MDI/MDIX）
1* 10/100M RJ45 POE OUT2（Auto Negotiation/Auto MDI/MDIX）
1*10/100M POE IN（PD reciprocating）（Auto Negotiation/Auto MDI/MDIX）
Standard/Protocol IEEE 802.3u, IEEE 802.1Q,IEEE 802.1p,IEEE 802.3af/at
Network Media 10BASE-T: Cat3,4,5 UTP(≤100 meter)
100BASE-TX: Cat5 or later UTP(≤100 meter)
 
Cascading POE OUT1 or POE OUT2 interface for cascading applications
Forwarding Mode Store-and-Forward
 
Performance Specification		 Bandwidth:0.6Gbps
Packet Buffer Memory:768kbits
packet forwarding rate:0.447MPPS
MAC Address Table: 1K
jumbo frame:2018bytes
LED Indicators Power: PWR; Link; PoE; Link/Act
 
 
 
PoE Specification		 PoE Standard: IEEE802.3af/ IEEE802.3at
Power Output:
Max. 15.4 watts (IEEE 802.3af)
Max. 30 watts (IEEE 802.3at)
PoE port Auto detect AF/AT devices
Output Voltage: DC48-57V
Power supply pin:1/2 (+) 3/6 (-) or 4/5 (+) 7/8 (-), input and output ports support 4-pin/8-pin power supply
Power Type: End-span( Mid-span optional)
Static power:<0.2W
 
Use environment		 Working temperature: -10 ℃~ 70 ℃ (32℉~127℉)
Storage temperature: -40 ℃~85 ℃ (-97℉~142℉)
Working humidity: 10%~90%
non-condensing Storage humidity: 5%~95% non-condensing
Shell plastic shell
Warranty 1-years

3-port standard POE cascade treasure, 1* 10/100M RJ45 POE OUT1（Auto Negotiation/Auto MDI/MDIX） 1* 10/100M RJ45 POE OUT2（Auto Negotiation/Auto MDI/MDIX） 1*10/100M POE IN（PD reciprocating）（Auto Negotiation/Auto MDI/MDIX）